Tel: 01245 943362
solutions@mjldisplays.co.uk
WhatsApp for Business

  • email icon
  • facebook icon
  • whatsApp Business icon
  • Twitter Icon
  • telephone icon

Printed Tablecloths

See a selection of common printed tablecloth pricing below .

£56.96

Overview

  • Printed on 210gsm Display Polyester.
  • Finished with a standard 10mm hem all around.
  • Dye-sublimation printed for vibrant colours and images
  • Each bespoke printed tablecloth is printed and finished to your requirements.
  • M1/B1 fire-rated to comply with UK and European fire safety standards
  • Standard finishing included at no extra charge
  • Approx maximum finished graphic width: 3000mm (depending on chosen finish)
  • Roll width: 3200mm

Printed Tablecloth Drop Length

You will need to know the amount of 'drop length' (also known as 'overhang') required from the edge of the table. This is the amount that the printed tablecloth will hang from the edge of the table down towards the floor.

For most situations, and especially where people will be sitting at a table, a 150mm to 200mm drop length is fine. For a longer drop length, such as the front of a table at a convention, trade show, craft fair or exhibition, we recommend going much closer to the floor. The greater drop length allows more privacy as well as a larger area for branding.

For certain situations, a short drop length may be required at the back of the table, while a full drop length is required for the front and sides. Please bear this in mind when calculating your printed tablecloth size.

How to Order Bespoke Rectangle Printed Tablecloths

To determine the size of a rectangular printed tablecloth, you will first need to know the length and width of the table for which it will be used, as well as the drop length required. The height of the table is not strictly necessary, but will be needed if you would like the tablecloth to reach the floor.

Assuming a consistent drop length of 150mm around the whole table:

  1. Take the drop length and multiply it by two (e.g. 150mm × 2 = 300mm). This will be your 'drop addition'.
  2. Take the table length and add the 'drop addition' from above (e.g. 2000mm + 300mm = 2300mm). The finished length will be 2300mm.
  3. Take the table width and add the 'drop addition' from above (e.g. 1000mm + 300mm = 1300mm). The finished width will be 1300mm.
  4. The finished size to order will be 2300mm × 1300mm. Please order Display Polyester at this size with 'Hems Only' as the finish.

View this tablecloth in our price calculator

How to Order Bespoke Circular Printed Tablecloths

To determine the size of a circular printed tablecloth, you will first need to know the diameter of the table for which it will be used. The height of the table is not strictly necessary, but will be needed if you would like the tablecloth to reach the floor.

Assuming a consistent drop length of 150mm around the whole table:

  1. Take the drop height and multiply it by two (e.g. 150mm × 2 = 300mm). This will be your 'drop addition'.
  2. Take the table diameter and add the 'drop addition' from above (e.g. 1500mm + 300mm = 2800mm).
  3. The finished size to order will be 2800mm × 2800mm. Please order this size with 'Shape Cut' as the finish, and let us know that a circular shape is required.

View this tablecloth in our price calculator

Corners

As standard, rectangular printed tablecloths are made with right-angled corners. Rounded corners can be ordered at no extra cost If you would like to avoid the printed tablecloth 'gathering' around the corners. Due to the nature of fabric finishing, a minimum corner radius of 300mm is required. If rounded corners are required, please let us know the radius/size of the rounded corners when ordering.

.

Other Printed Tablecloth Shapes and Sizes

For any bespoke shapes, alternative corners, or anything not covered above, please contact us for detailed advice and a bespoke quote.